Kyocera TASKalfa 3510i Service Manual page 431

Hide thumbs Also See for TASKalfa 3510i:

Table of Contents

14. Remove all connectors and FFC from

the engine PWB.

15. Remove four screws and then remove

the engin PWB.

16. Check or replace the engine PWB and

refit all the removed parts.

CAUTION: When replacing the engine

PWB, remove the EEPROM from the

engine PWB that has been removed

and then reattach it to the new engine

Figure 1-5-81

Show Quick Links

Table of Contents

Taskalfa 3010i