There Is A Regular Error Between The Centers Of The Original And Copy Image When The Dp Is Used; There Is A Regular Error Between The Leading Edges Of The Original And Copy Image When The Dp Is Used; A Line Appears At The Leading Or Trailing Edge; A Line Appears Periodically - Kyocera KM-6030 Service Manual

2FB/2FC-4
(20) There is a regular error between
the centers of the original and
copy image when the DP is used.
Causes
1. Misadjusted center line.
(21) There is a regular error between
the leading edges of the original
and copy image when the DP is
used.
Causes
1. Misadjusted original scanning start posi-
tion.
(22) A line appears at the leading or
trailing edge.
70mm
Causes
1. Misadjusted of the speeds of the motors.

(23) A line appears periodically.

64mm
64mm
64mm
Causes
1. Misadjusted of the speeds of the motors.
1-5-56
Causes
1. Misadjusted center line.
Check procedures/corrective measures
Readjust the DP center line (see page 1-6-92).
Causes
1. Misadjusted original scanning start position.
Check procedures/corrective measures
Readjust the DP leading timing (see page 1-6-93).
Causes
1. Misadjusted of the speeds of the motors.
Check procedures/corrective measures
Change the setting for TC Setting (Uneven Image) of maintenance item
U053 (see page 1-4-16).
Causes
1. Misadjusted of the speeds of the motors.
Check procedures/corrective measures
Change the setting for TC Setting (Uneven Image) of maintenance item
U053 (see page 1-4-16).