Kyocera TASKalfa 3510i Service Manual page 517

Item
Automatic continue for 'Press
GO'
Automatic continue timer
Error message for device error
Duplex operation for specified
paper type
(Prepunched, Preprintedand
Letterhead)
Default operation for PDF direct
printing
e-MPS error
a. Characters higher than 127 are printed regardless of the C8 value. However, setting C8 to 0 does not
print character code 160.
*: Ignored in some emulation modes.
FRPO
Y0 0: Off
1: On
Y1 Value in units of 5 seconds (1 to 99)
Y3 0: Not detect
127: Detect
Y4 0: Off
1: On
Y5 0: Enlarges or reduces the image to fit in the
current paper size. Loads paper from the
current paper cassette.
1: Through the image. Loads paper which is
the same size as the image.
2: Enlarges or reduces the image to fit in the
current paper size. Loads Letter, A4 size
paper depending on the image size.
3: Through the image. Loads Letter, A4 size
paper depending on the image size.
8: Through the image. Loads paper from the
current paper cassette.
9: Through the image. Loads Letter, A4 size
paper depending on the image size.
10: Enlarges or reduces the image to fit in the
current paper size. Loads Letter, A4 size
paper depending on the image size.
Y6 0: Does not print the error report and display
the error message.
1: Prints the error report.
2: Displays the error message.
3: Prints the error report and displays the error
message.
2-4-12
Setting values
2NL/2P8
Factory
setting
0
6 (30 s)
127
0
0
3