U600 Initializing All Data - Kyocera TASKalfa 3510i Service Manual

Hide thumbs Also See for TASKalfa 3510i:

Table of Contents

Initializing all data

Initializes software switches and all data in the backup data on the FAX control PWB, according

to the destination and OEM.

Executes the check of the file system, when abnormality of the file system is detected, initializes

the file system, communication past record and register setting contents.

To initialize the FAX control PWB.

1. Press the start key.

2. Select [Country Code] and enter a destination code using the numeric keys.

Refer to the destination code list on following for the destination code.

OEM code is no operation necessary.

3. Select [Execute].

4. Press the start key. Data initialization starts. To cancel data initialization, press the stop key.

5. After data initialization, ROM version are displayed.

A ROM version displays three kinds, application, boot, and IPL.

Destination code list

South Africa

South America

Saudi Arabia

CTR21 (European nations)

Show Quick Links

Table of Contents

Taskalfa 3010i