U026 Pulling Backup Data; U030 Checking The Operation Of The Motors - Kyocera TASKalfa 3510i Service Manual

Item No.
U026 Pulling Backup Data
Description
Performs restoring of the backup data..
Purpose
Restores the setting values that was backed up in the flash memory from the HDD.
Method
1. Press the start key.
2. Press [Execute].
3. Press the start key.
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
* : NG will be displayed when an error was resulted at completion.
Saved data:
U278 Setting the delivery date
U402 Adjusting margins of image printing
U952 Maintenance mode workflow
U030 Checking the operation of the motors
Description
Drives each motor.
Purpose
To check the operation of each motor.
Method
1. Press the start key.
2. Select the motor to be operated.
3. Press the start key. The operation starts.
Main
Exit(CW)
Exit(CCW)
Feed2
Bridge
4. To stop operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Main motor (MM) is turned on
Eject motor (EM) is turned on clockwise
Eject motor (EM) is turned on counterclockwise
Feed2 motor (PFM2) is turned on
Bridge motor is turned on
Description
Description
1-3-31
2NL/2P8