Kyocera TASKalfa 3510i Service Manual page 525

Adjusting
Item
order
Adjusting the left and right margins
(scanning adjustment)
16
Image quality
Item Specifications
100% magnification Machine: ±0.8%
Using DP: ±1.5%
Enlargement/reduction Machine: ±1.0%
Using DP: ±1.5%
Lateral squareness Machine: ±1.5 mm/375 mm
Using DP: ±2.5 mm/375 mm
Leading edge registration Cassette: +1.0/-1.5 mm
MP tray: +1.0/-1.5 mm
Duplex: +1.0/-1.5 mm
Skewed paper feed Cassette: 1.5 mm or less
(left-right difference) MP tray: 1.5 mm or less
Duplex: 2.0 mm or less
Lateral image shifting Cassette: ±2.0 mm
MP tray: ±2.0 mm
Duplex: ±3.0 mm
When maintenance item U411 (Automatic adjustment in the scanner) is run using the specified original (P/N 7505000005),
the following adjustments are automatically made:
Adjusting the scanner magnification (U065)
Adjusting the scanner leading edge registration (U066)
Adjusting the scanner center line (U067)
When maintenance item U411 (Automatic adjustment in the DP) is run using the specified original (P/N 302AC68243),
the following adjustments are automatically made:
* : When running this test chart, you first must clean the feed rollers with alcohol and ensure the DP width guides
are correctly positioned against the original.
Adjusting the DP magnification (U070)
Adjusting the DP leading edge registration (U071)
Adjusting the DP center line (U072)
Image Description
Adjusting the original scan data
(image adjustment)
Maintenance mode
Original
Item No. Mode
U403 A MARGIN Test chart
C MARGIN
U404 A MARGIN
C MARGIN
2-4-20
Page Remarks
P.1-3-115 U403: For copying an original placed on
the contact glass
P.1-3-116 U404: For copying originals from the DP.
2NL/2P8