U201 Initializing The Touch Panel - Kyocera TASKalfa 3510i Service Manual

Item No.
U201 Initializing the touch panel
Description
Adjust touch panel detecting positions.
Purpose
When the panel PWB or the operation panel is replaced or if the detecting positions are not
aligned, perform this simulation to correct and confirm.
Method
1. Press the start key.
2. Select the [Initialize] or [Check].
Initialize
Check
Method: [Initialize]
1. Press the start key.
2. Tap the center of the + sign.
3. Press the center of the [+] key dis-
played next.
* : Press it using a tool with a fine tip.
Display
Execute the correction of the touch panel display position.
Confirm the display position of touch panel.
Description
Description
Maintenance Mode
Maintenance Mode Active
Initialize Touch Panel
Initialize
Check
+
Press the center of the "+" sign.
* Press it using a tool with a fine tip.
1-3-72
2NL/2P8
U201
Figure 1-3-17
Figure 1-3-18