Kyocera TASKalfa 3510i Service Manual page 200

Item No.
U246 Setting: [Staple HP]
1. Select [Staple HP].
2. Change the setting value using the +/- keys or numeric keys.
Adjustment of front and back stapling home position -5 to 5
When staple positions are off toward the front side of the machine (sample 1), increase the
setting value. When staple positions are off toward the rear side of the machine (sample 2),
decrease the setting value.
3. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Sample 1
Figure 1-3-35
1-3-100
Setting Initial
range setting value per step
0 1 mm
Sample 2
2NL/2P8
Change in