Setting The Action To Be Taken When A Count Limit Is Reached - Kyocera Taskalfa Pro 15000c Operation Manual

Job Accounting > Setting the Action to be Taken When a Count Limit is Reached
Setting the Action to be Taken When a
Count Limit is Reached
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
Item
Immediately
Subsequently
Alert Only
1
2
Job stops when the counter reaches its limit.
The next job will be prohibited in sending or in storing in the box.
Printing/scanning of the job continues but the subsequent job will be rejected.
Job continues while displaying an alert message.
Display the screen.
1
[System Menu/Counter] key > [Job Accounting]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator
privileges.
The factory default login user name and login password are both set as 15000.
2
"Job Accounting Setting" [Job Accounting Setting] > "Default Setting" [Apply Limit]
Configure the settings.
Select [Immediately], [Subsequently], or [Alert Only].
Description
16-16