Kyocera TASKalfa 3510i Service Manual page 58

30. Secure the tray lower cover with two
pins.
31. Adhere the sheet onto right side of the
document table.
32. Fit the rear cover using seven screws.
33. Insert the key counter into the key
counter socket assembly.
34. Turn the main power switch on and
enter the maintenance mode.
35. Run maintenance item U204 and select
[Key-Counter] (see page P.1-3-80).
36. Exit the maintenance mode.
37. Check that the message requesting the
key counter to be inserted is displayed
on the touch panel when the key coun-
ter is pulled out.
38. Check that the counter counts up as
copies are made.
Figure 1-2-43
Sheet
Figure 1-2-44
1-2-34
2NL/2P8
Tray lower cover
Pin
Pin
Document
table