Kyocera TASKalfa 3510i Service Manual page 193

Item No.
U241
Lead Paddle
Shift Front HP
Shift Tail HP
Shift Unlock HP
Sub Tray Full
Shift Set
:3 000-sheet finisyer only,
*1
Method: [Mail Box]
1. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in
reverse.
Eject
Cover
Over Flow1
Over Flow2
Over Flow3
Over Flow4
Over Flow5
Over Flow6
Over Flow7
Motor HP
Method: [Punch]
1. Turn each switch or sensor on and off manually to check the status.
When the on-status of a switch or sensor is detected, that switch or sensor is displayed in
reverse.
Punch HP
Edge Face1
Edge Face2
Edge Face3
Edge Face4
Tank
Tank Full
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
DF paddle sensor (DFPDS)
DF sift sensor (DFSFS1)
*1
DF shift sensor 2 (DFSFS2)
DF shift release sensor (DFSFRS)
DF sub tray full sensor (DFSTFS)
DF shift set sensor (DFSFSS)
: 1000-sheet finisher only
*2
Display
MB eject sensor (MBES)
MB cover open/close switch (MBCOCSW)
MB overflow sensor 1 (MBOFS1)
MB overflow sensor 2 (MBOFS2)
MB overflow sensor 3 (MBOFS3)
MB overflow sensor 4 (MBOFS4)
MB overflow sensor 5 (MBOFS5)
MB overflow sensor 6 (MBOFS6)
MB overflow sensor 7 (MBOFS7)
MB paper entry sensor (MBPES)
Display
Punch home position sensor (PUHPS)
Punch paper edge sensor (PUPES)
Punch paper edge sensor (PUPES)
Punch paper edge sensor (PUPES)
Punch paper edge sensor (PUPES)
Punch tank set switch (PUTSSW)
Punch tank full sensor (PUTFS)
Description
Description
Description
Description
1-3-93
2NL/2P8