Init All Data; Destination Code List - Kyocera TASKalfa 1800 Service Manual

U600

Init All Data

Description
Initializes software switches and all data in the backup data on the FAX control board, according to
the destination and OEM.
Executes the check of the file system, when abnormality of the file system is detected, initializes
the file system, communication past record and register setting contents.
Purpose
To initialize the FAX control board.
Method
1. Press the start key.
The screen for entering the destination code and OEM code is displayed.
2. Select [Country Code] and enter a destination code using the numeric keys (refer to the desti-
nation code list on following for the destination code).
Display
Country Code
OEM Code
Execute
* : OEM code is no operation necessary.
3. Select [Execute] and press the start key.
Data initialization starts. To cancel data initialization, press the stop key.
4. After data initialization, the entered destination, OEM codes and ROM version are displayed. A
ROM version displays three kinds, application, boot, and IPL.
* : When initialization is successful, "Completed" during 1 second is displayed.
* : Where an irregular value is inputted, when it initializes, the following error displays are per-
formed.
Unknown Country
Unknown OEM

Destination code list

Code
000
007
009
038
080
088
097
115
126
Country code.
OEM code.
Data initialization starts.
Kind of error
Destination
Japan
Argentina
Australia
China
Hong Kong
Israel
Korea
Mexico
New Zealand
Destination
Code
152
156
159
169
181
250
253
1-3-81
2NC/2NF/2NG/2NN/3P7/3P8/3P9-4
Destination
Saudi Arabia
Singapore
South Africa
Thailand
U.S.A.
Russia
CTR21 (European nations)
Italy
Germany