Routing Table Commands - D-Link DES-3226L Reference Manual

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
R
The routing table commands in the Command Line Interface
(CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
create iproute default
<ipaddr>
<metric 1-65535>
delete iproute default
show iproute
Each command is listed, in detail, in the following sections.
create iproute
Purpose Used to create an IP route entry to the
switch's IP routing table.
Syntax create iproute [default|<ipaddr>
{<metric>}]
Description This command is used to create an IP route
entry to the switch's IP routing table
T
OUTING
C
OMMANDS
179
19
ABLE