D-Link DES-3226L Reference Manual page 105

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
DES-3226L:4#config syslog host all severity all facility local0
Command: config syslog host all severity all facility local0
Success.
DES-3226L:4#
delete syslog host
Purpose Used to remove a syslog host, that has
been previously configured, from the
switch.
delete syslog host [<index 1-4>|all]
Syntax
Description The delete syslog host command is used
to remove a syslog host that has been
previously configured from the switch.
<index 1-4> − Specifies that the command
Parameters
will be applied to an index of hosts. There
are four available indexes, numbered 1
through 4.
all − Specifies that the command will be
applied to all hosts.
Restrictions Only administrator-level users can issue
this command.
Example usage:
To delete a previously configured syslog host:
105