D-Link DES-3226L Reference Manual page 43

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
config ports
flowcontrol [enabled|disabled] − Enables or
disables flow control for the specified range of
ports.
learning
disables the MAC address learning on the
specified range of ports.
state [enabled|disabled] − Enables or disables
the specified range of ports.
Restrictions Only administrator-level users can issue this
command.
Example Usage:
To configure the speed of the ports 1 to 3 to be 10 Mbps,
full duplex, learning, and state enabled:
DES-3226L:4#config ports 1-3 speed 10_full learning enabled state
enabled
Command: config ports 1-3 speed 10_full learning enabled state
enabled
Success.
DES-3226L:4#
−
[enabled|disabled]
43
Enables or