Routing Table Commands - D-Link DGS-3224SR Command Line Interface Reference Manual

DGS-3224SR Stackable Gigabit Ethernet Switch User's Guide
R
Command Parameters
create iproute <ipaddr> {metric 1-65535}
default
delete iproute
default
show iproute
Each command is listed, in detail, in the following sections.
create iproute default
Purpose Used to create a default IP route entry.
Create iproute default <ipaddr> {metric
Syntax
1-65535}
Description This command creates a default IP route
entry.
Parameters default − creates a default IP route entry.
T
OUTING
C
OMMANDS
255
23
ABLE