D-Link DES-3226L Reference Manual page 169

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
config igmp_snooping querier
Purpose Used to configure the time in seconds
between general query transmissions, the
maximum time in seconds to wait for
reports
packet
snooping.
config igmp_snooping querier
Syntax
[<vlan_name>|all] {query_interval
<sec>|max_response_time
<sec>|robustness_variable
<value>|last_member_query_interval
<sec>|state [enable|disable]
Description This command configures IGMP snooping
querier.
Parameters <vlan_name> − The name of the VLAN for
which IGMP snooping querier is to be
configured.
query_interval
amount of time in seconds between general
query transmissions. the default setting is
125 seconds.
max_response_time <sec> − Specifies the
maximum time in seconds to wait for
reports from members. The default setting
is 10 seconds.
robustness_variable
fine-tuning to allow for expected packet
loss on a subnet. The value of the
robustness variable is used in calculating
from members, the
loss that guarantees
−
<sec> Specifies
−
<value>
169
permitted
IGMP
the
Provides