D-Link DES-3226L Reference Manual page 187

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
config 802.1x auth_protocol
this command.
Example Usage:
To configure 802.1x authentication protocol:
config 802.1x auth_protocol
DES-3226L:4#
Command: config 802.1x auth_protocol local
Success.
DES-3226L:4#
config 802.1x capability
Purpose
Used to configure the 802.1x capability of a
range of ports on the switch.
Syntax
config 802.1x capability ports
[<portlist>|all] [authenticator|none]
Description
The config 802.1x command has two
capabilities that can be set for each port:
Authenticator and None.
Parameters
<portlist> − Specifies a range of ports. The
port list is specified by listing the beginning
port number and the highest port number
of the range. The beginning and end of the
port list range are separated by a dash. For
example, 3 would specify port 3. 4 specifies
port 4. 3-4 specifies all of the ports
between port 3 and port 4 − in numerical
order.
187