DES-3226L Layer 2 Fast Ethernet Switch User's Guide
show ports
Purpose
Syntax
Description
Parameters
Restrictions
Example Usage:
To display the configuration of the ports 1-7:
Used
to
display
configuration of a range of ports.
show ports {<portlist>}
This command is used to display the
current configuration of a range of
ports.
<portlist> − specifies a range of ports
to be configured. The port list is
specified by listing the beginning port
number and the highest port number
of the range. The beginning and end
of the port list range are separated by
a dash. For example, 3 would specify
port 3. 4 specifies port 4. 3-4 specifies
all of the ports between port 3 and
port 4 − in numerical order.
none.
44
the
current