D-Link DES-3226L Reference Manual page 127

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
config 802.1p user_priority
Purpose Used to map the 802.1p user priority of an
incoming packet to one of the two hardware
queues available on the switch.
config 802.1p user_priority <priority 0-
Syntax
7> <class_id 0-1>
Description The config 802.1p user_priority
command is used to configure the way the
switch will map an incoming packet, based
on its 802.1p user priority tag, to one of the
two hardware priority queues available on
the switch. The switch's default is to map
the incoming 802.1p priority values to the
two hardware queues according to the
following chart:
802.1p
Value
---------
0
1
2
3
4
5
Switch Priority Remark
Queue
------------------ -----------
0 low
0 low
0 low
0 low
1 high
1 high
127