D-Link DES-3226L Reference Manual page 34

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
enable telnet
specify the TCP or UDP port number the
switch will use to listen for Telnet requests.
Parameters
<tcp_port_number>
number. TCP ports are numbered between
1 and 65535. The "well-known" TCP port
for the Telnet protocol is 23.
Restrictions none
Example Usage:
To enable Telnet and configure port number:
DES-3226L:4#enable telnet 23
Command: enable telnet 23
Success.
DES-3226L:4#
disable telnet
Purpose Used to disable the Telnet protocol on the
switch.
Syntax disable telnet
Description This command is used to disable the Telnet
protocol on the switch.
Parameters none.
Restrictions none
−
the TCP
34
port