D-Link DES-3226L Reference Manual page 188

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
config 802.1x capability
all − Specifies all of the ports on the switch.
authenticator − A user must pass the
authentication process to gain access to
the network.
none − The port is not controlled by the
802.1x functions.
Restrictions
Only administrator-level users can issue
this command.
Example Usage:
To configure 802.1x capability on ports 1-10:
config 802.1x capability ports 1 – 10 authenticator
DES-3226L:4#
Command: config 802.1x capability ports 1-10 authenticator
Success.
DES-3226L:4#
config 802.1x auth_parameter
Purpose
Used
Authentication parameters on a range of
ports. The default parameter will return all
ports in the specified range to their default
802.1x settings.
Syntax
config
[<portlist>|all]
[both|in]|port_control
to configure the
802.1x auth_parameter
[default|{direction
188
802.1x
ports