D-Link DES-3226L Reference Manual page 145

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
Success.
DES-3226L:4#
config vlan add ports
Purpose Used to add additional ports to a previously
configured VLAN.
Syntax config vlan <vlan_name 32> add
[tagged|untagged|forbidden] <portlist>
Description This command allows you to add ports to
the port list of a previously configured
VLAN. You can specifiy the additional ports
as tagging, untagging, or forbidden.
Parameters <vlan_name> − The name of the VLAN you
want to add ports to.
tagged − Specifies the additional ports as
tagged.
untagged − Specifies the additional ports as
untagged.
forbidden − Specifies the additional ports
as forbidden.
<portlist> − A range of ports to add to the
VLAN. The port list is specified by listing
the beginning port number and the highest
port number of the range. The beginning
and end of the port list range are separated
by a dash. For example, 3 would specify
port 3. 4 specifies port 4. 3-4 specifies all of
145