D-Link DES-3226L Reference Manual page 205

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
show radius auth_client
Syntax
show radius auth_client ports <portlist>
Description
The show radius auth_client command
displays
information.
Parameters
<portlist> − − Specifies a range of ports. The
port list is specified by listing the beginning
port number and the highest port number
of the range. The beginning and end of the
port list range are separated by a dash. For
example, 3 would specify port 3. 4 specifies
port 4. 3-4 specifies all of the ports between
port 3 and port 4 − in numerical order.
Restrictions
none
Example usage:
To display radius authentication client information for port
1:
DES-XXXXS:4# show radius auth_client
Command: show radius auth_client
radiusAuthClient ==>
radiusAuthClientInvalidServerAddresses 0
radiusAuthClientIdentifier
radiusAuthServerEntry ==>
radiusAuthServerIndex :1
radiusAuthServerAddress
radiusAuthClientServerPortNumber
radiusAuthClientRoundTripTime
radiusAuthClientAccessRequests
radius authenticator
D-Link
0.0.0.0
X
0
0
205
client