D-Link DES-3226L Reference Manual page 159

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
config link_aggregation
switch allows up to 32 link aggregation
groups to be configured. The group number
identifies each of the groups.
master_port <port> − Master port ID.
Specifies which port (by port number) of
the link aggregation group will be the
master port.
aggregation group will share the port
configuration with the master port.
<portlist> − Specifies a range of ports that
will belong to the link aggregation group.
The beginning and end of the port list
range
example, 3 would specify port 3. 4 specifies
port 4. 1-4 specifies all of the ports between
port 1 and port 4 − in numerical order.
state [enable|disable] − Allows you to
enable
aggregation group.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To define a load-sharing group of ports, group-id 1,
master port 17:
DES-3226L:4#config link_aggregation group_id 1 master_port 17
ports 5-10
Command: config link_aggregation group_id 1 master_port 17
ports 5-10
All of the ports in a link
are separated by a dash. For
or disable the specified
159
link