DES-3226L Layer 2 Fast Ethernet Switch User's Guide
show radius acct_client
displays radius account client information.
Parameters
<portlist> − − Specifies a range of ports. The
port list is specified by listing the beginning
port number and the highest port number
of the range. The beginning and end of the
port list range are separated by a dash. For
example, 3 would specify port 3. 4 specifies
port 4. 3-4 specifies all of the ports between
port 3 and port 4 − in numerical order.
Restrictions
none
Example usage:
To display radius account client information for port 1:
DES-XXXXS:4# show radius acct_client
Command: show radius acct_client
radiusAcctClient ==>
radiusAcctClientInvalidServerAddresses 0
radiusAcctClientIdentifier
radiusAuthServerEntry ==>
radiusAccServerIndex : 1
radiusAccServerAddress
radiusAccClientServerPortNumber
radiusAccClientRoundTripTime
radiusAccClientRequests
radiusAccClientRetransmissions
radiusAccClientResponses
radiusAccClientMalformedResponses
radiusAccClientBadAuthenticators
D-Link
0.0.0.0
X
0
0
0
0
0
0
207