D-Link DES-3226L Reference Manual page 192

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
config 802.1x init
between port 3 and port 4 − in numerical
order.
all − Specifies all of the ports on the switch.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To initialize 802.1x port-based functions on ports 1 to
15:
config 802.1x init ports 1-15
DES-3226L:4#
Command: config 802.1x init ports 1-15
Success.
DES-3226L:4#
config 802.1x reauth
Purpose Used
authentication feature of the switch.
config
Syntax
[<portlist>|all]
Description The config 802.1x reauth command is used
to enable the 802.1x re-authentication
feature on the switch.
Parameters <portlist> − Specifies a range of ports. The
port list is specified by listing the beginning
port number and the highest port number
to configure the 802.1x
802.1x reauth
192
re-
ports