D-Link DES-3226L Reference Manual page 49

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
Each command is listed, in detail, in the following sections.
create snmp user
Purpose Used to create a new user to an SNMP
group originated by this command.
Syntax create snmp user <username 32>
<groupname 32> [v1 | v2c | v3] {encrypted(1)
[by_password(1) auth [md5(2)
<auth_password 8-16 > | sha(3)
<auth_password 8-20 >] priv [none(1) |
des(2) <priv_password 8-16> ] | by_key(2)
auth [md5(2) <auth_key 32-32>| sha(3)
<auth_key 40-40>] priv [none(1) | des(2)
<priv_key 32-32> ]]}
Description The create snmp user command creates a
new user to an SNMP group originated by
this command. User can chose input
authencation and privacy by password or
by key.
<username> − The name of the user on the
Parameters
host that connects to the agent.The range
is 1 to 32 .
<groupname> − The name of the group to
which the user is associated.The range is 1
to 32 .
encrypted - Specifies whether the password
appears in encrypted format.
by_password - indicate input password for
authentication and privacy
49