D-Link DES-3226L Reference Manual page 194

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
config radius add
Description The config radius add command is used to
configure the settings the switch will use to
communicate with a RADIUS server.
Parameters <server_index 1-3> − Assigns a number to
the current set of RADIUS server settings.
Up to three groups of RADIUS server
settings can be entered on the switch.
<server_ip> − The IP address of the RADIUS
server.
key − Specifies that a password and
encryption key will be used between the
switch and the RADIUS server.
<passwd 32> − The shared-secret key
used by the RADIUS server and the
switch. Up to 32 characters can be used.
default − Returns all of the ports in the
range to their default RADIUS settings.
auth_port <udp_port_number> − The UDP
port number for authentication requests.
The default is 1812.
acct_port <udp_port_number> − The UDP
port number for accounting requests. The
default is 1813.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
194