D-Link DES-3226L Reference Manual page 72

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
show snmp host
Syntax show snmp host {<ipaddr>}
Description The show snmp host command is used to
display the IP addresses and configuration
information of remote SNMP managers that
are designated as recipients of SNMP traps
that are generated by the Switch's SNMP
agent.
Parameters <ipaddr> − The IP address of a remote
SNMP manager that will receive SNMP
traps generated by the Switch's SNMP
agent.
Restrictions none.
Example Usage:
To display the currently configured SNMP hosts on the
switch:
DES-3226L:4# show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address SNMP Version
--------------- --------------------- ------------------------------
10.48.76.23 V2c private
10.48.74.100 V3
Success.
DES-3226L:4#
Community Name
authpriv public
72