D-Link DES-3226L Reference Manual page 158

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
delete link_aggregation group_id
Parameters <value> − Specifies the group id. The
switch allows up to 7 link aggregation
groups to be configured. The group number
identifies each of the groups.
Restrictions Only administrator-level users can issue
this command.
Example Usage:
To delete link aggregation group:
DES-3226L:4#delete link_aggregation group_id 6
Command: delete link_aggregation group_id 6
Success.
DES-3226L:4#
config link_aggregation
Purpose Used to configure a previously created link
aggregation group.
config link_aggregation group_id <value>
Syntax
{master_port <port>|ports <portlist>|
state [enabled|disabled]
Description This command allows you to configure a
link aggregation group that was created
with the create link_aggregation command
above.
Parameters <value> − Specifies the group id. The
switch allows up to 32 link aggregation
158