D-Link DES-3226L Reference Manual page 35

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
Example Usage:
To disable the Telnet protocol on the switch:
DES-3226L:4#disable telnet
Command: disable telnet
Success.
DES-3226L:4#
enable web
Purpose Used
management software on the switch.
Syntax enable web <tcp_port_number>
Description This command is used to enable the Web-
based management software on the switch.
The user can specify the TCP port number
the switch will use to listen for Telnet
requests.
Parameters
<tcp_port_number>
number. TCP ports are numbered between
1 and 65,535. The "well-known" port for
the Web-based management software is 80.
Restrictions none
Example Usage:
To enable HTTP and configure port number:
DES-3226L:4#enable web 80
Command: enable web 80
to enable the HTTP-based
−
The
35
TCP port