D-Link DES-3226L Reference Manual page 196

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
DES-3226L:4#
config radius
Purpose Used to configure the switch's RADIUS
settings.
config
Syntax
{ipaddress
<server_ip>|key <passwd 32>|auth_port
<udp_port_number>|acct_port
<udp_port_number>}
Description The config radius command is used to
configure the switch's RADIUS settings.
Parameters <server_index 1-3> − Assigns a number to
the current set of RADIUS server settings.
Up to three groups of RADIUS server
settings can be entered on the switch.
<server_ip> − The IP address of the RADIUS
server.
key − Specifies that a password and
encryption key will be used between the
switch and the RADIUS server.
<passwd 32> − The shared-secret key
used by the RADIUS server and the
switch. Up to 32 characters can be used.
default − Returns all of the ports in the
range to their default RADIUS settings.
auth_port <udp_port_number> − The UDP
radius <server_index
<server_ip> {ipaddress
196
1-3>