D-Link DES-3226L Reference Manual page 210

DES-3226L Layer 2 Fast Ethernet Switch User's Guide
After following the above steps, you can configure an
•
SSH Client on the remote PC and manage the Switch
using secure, in-band communication.
The Secure Shell (SSH) commands in the Command Line
Interface (CLI) are listed (along with the appropriate parameters)
in the following table.
Command Parameters
config ssh [3DES|Blowfish|MD5|SHA1| DSA|RSA]
algorithm [enable|disable]
show ssh
algorithm
config ssh [password |publickey| hostbased]
authmode [enable|disable]
show ssh
authmode
config ssh user <username> authmode [Publickey
|Password | Hostbased [host_name
<domain_name 32> |hostname_IP
<domain_name 32> <ipaddr>]]
show ssh user
config ssh server {maxsession <int 1-2>| contimeout <sec
120-600> | authfail <int 2-20> |rekey [10min
|30min | 60min |never]}
show ssh server
enable ssh
disable ssh
Each command is listed, in detail, in the following sections.
config ssh algorithm
Purpose Used to configure the SSH algorithm.
210