Verifying The Configuration - H3C S7500E-X Configuration Manual

[Device] interface gigabitethernet 1/0/3
[Device-GigabitEthernet1/0/3] port-isolate enable group 2
[Device-GigabitEthernet1/0/3] quit

Verifying the configuration

# Display information about isolation group 2.
[Device] display port-isolate group 2
Port isolation group information:
Group ID: 2
Group members:
GigabitEthernet1/0/1
Community VLAN ID: None
The output shows that ports GigabitEthernet 1/0/1, GigabitEthernet 1/0/2, and GigabitEthernet 1/0/3
are assigned to isolation group 2. As a result, Host A, Host B, and Host C are isolated from one
another at layer 2.
GigabitEthernet1/0/2
56
GigabitEthernet1/0/3