Displaying And Maintaining Qinq - H3C S7500E-X Configuration Manual

Step
Configure a priority
6.
marking action for SVLAN
tags.
Return to system view.
7.
Create a QoS policy and
8.
enter QoS policy view.
Associate the traffic class
9.
with the traffic behavior in
the QoS policy.
10. Return to system view.
11. Enter Layer 2 Ethernet
interface view.
12. Configure the port to trust
the 802.1p priority in
incoming frames.
13. Enable QinQ.
14. Apply the QoS policy to
the inbound direction of
the port.
For more information about QoS policies, see ACL and QoS Configuration Guide.

Displaying and maintaining QinQ

Execute display commands in any view.
Task
Display QinQ-enabled ports.
Command
•
Replace the priority in the SVLAN tags
of matching frames with the configured
priority:
remark dot1p dot1p-value
•
Copy the 802.1p priority in the CVLAN
tag to the SVLAN tag:
remark dot1p customer-dot1p-trust
quit
qos policy policy-name
classifier classifier-name behavior
behavior-name
quit
interface interface-type interface-number
qos trust dot1p
qinq enable
qos apply policy policy-name inbound
Command
display qinq [ interface interface-type
interface-number ]
194
Remarks
N/A
N/A
N/A
N/A
N/A
N/A
By default, the device
does not trust the priority
carried in frames.
This step is required only
if the remark dot1p
command is configured.
N/A
N/A