Voice VLAN configuration task list
Tasks at a glance
(Required.)
(Required.) Use one of the following methods:
•
Configuring a port to operate in automatic voice VLAN assignment mode
•
Configuring a port to operate in manual voice VLAN assignment mode
(Optional.)
(Optional.) Use one of the following methods:
•
Configuring LLDP to advertise a voice VLAN
•
Configuring CDP to advertise a voice VLAN
Configuring the QoS priority settings for voice
traffic
The QoS priority settings carried in voice traffic include the CoS and DSCP values. You can
configure the device to modify the QoS priority settings for voice traffic.
Before you configure the QoS priority settings for voice traffic on a port, make sure the voice VLAN
feature is disabled on it.
To configure the QoS priority settings for voice traffic:
Step
Enter system view.
1.
Enter Layer 2 Ethernet
2.
interface view.
Configure QoS priority
3.
settings for incoming voice
VLAN packets.
Configuring the QoS priority settings for voice traffic
Enabling LLDP for automatic IP phone discovery
Command
system-view
interface interface-type
interface-number
•
Configure the port to trust the
QoS priority settings:
voice-vlan qos trust
•
Configure the port to modify the
CoS and DSCP values:
voice-vlan qos cos-value
dscp-value
163
Remarks
N/A
N/A
By default, a port modifies the
CoS and DSCP values for
voice VLAN packets to 6 and
46, respectively.
If a port trusts the QoS priority
settings in incoming voice
VLAN packets, the port does
not modify their CoS and
DSCP values.
If you execute the voice-vlan
qos and voice-vlan qos trust
commands multiple times, the
most recent configuration
takes effect.