Pvst Configuration Example - H3C S7500E-X Configuration Manual

Figure 30 MSTIs mapped to different VLANs
C
MSTI 1 mapped to VLAN 10
MSTI 3 mapped to VLAN 30

PVST configuration example

Network requirements
As shown in
Device D work at the access layer.
Configure PVST to meet the following requirements:
•
Packets of a VLAN are forwarded along the spanning trees of the VLAN.
•
VLAN 10, VLAN 20, and VLAN 30 are terminated on the distribution layer devices, and VLAN
40 is terminated on the access layer devices.
•
The root bridge of VLAN 10 and VLAN 20 is Device A.
•
The root bridge of VLAN 30 is Device B.
•
The root bridge of VLAN 40 is Device C.
A B
A B
Root bridge Normal link
Figure 31, Device A and Device B work at the distribution layer, and Device C and
A
C
MSTI 0 mapped to VLAN 20
D C
MSTI 4 mapped to VLAN 40
103
B
D
D
Blocked link