Configuring Mac Address Entries; Configuration Guidelines; Adding Or Modifying A Static Or Dynamic Mac Address Entry Globally; Adding Or Modifying A Static Or Dynamic Mac Address Entry On An Interface - H3C S7500E-X Configuration Manual

Layer 2 lan switching
Hide thumbs Also See for H3C S7500E-X:
Table of Contents

Advertisement

Configuring MAC address entries

Configuration guidelines

You cannot add a dynamic MAC address entry if a learned entry already exists with a different
outgoing interface for the MAC address.
The manually configured static, blackhole, and multiport unicast MAC address entries cannot
survive a reboot if you do not save the configuration. The manually configured dynamic MAC
address entries are lost upon reboot whether or not you save the configuration.
A frame whose source MAC address matches different types of MAC address entries is processed
differently.
Type
Static MAC address entry
Multiport unicast MAC
address entry
Dynamic MAC address
entry
Blackhole MAC address
entry
Adding or modifying a static or dynamic MAC address entry
globally
Step
Enter system
1.
view.
Add or modify a
2.
static or dynamic
MAC address
entry.
Adding or modifying a static or dynamic MAC address entry
on an interface
Step
Enter system view.
1.
Description
Forwards the frame according to the destination MAC address regardless of
whether the frame's ingress interface is the same as that in the entry.
Learns the MAC address (MAC A) of the frame and generates a dynamic
MAC address entry, but the entry does not take effect.
Forwards frames destined for MAC A based on the multiport unicast
MAC address entry.
Learns the MAC address of the frames received on a different interface
from that in the entry and overwrites the original entry.
Forwards the frame received on the same interface as that in the entry
and updates the aging timer for the entry.
Discards the frame.
Command
system-view
mac-address { dynamic | static } mac-address
interface interface-type interface-number vlan
vlan-id
Command
system-view
3
Remarks
N/A
By default, no MAC address
entry is configured globally.
Make sure you have created
the VLAN and assigned the
interface to the VLAN.
Remarks
N/A

Advertisement

Table of Contents
loading

Table of Contents