Assigning A Trunk Port To A Vlan - H3C S7500E-X Configuration Manual

Step
Enter interface view.
2.
Configure the link type of the
3.
port as access.
(Optional.) Assign the
4.
access port to a VLAN.

Assigning a trunk port to a VLAN

A trunk port supports multiple VLANs. You can assign it to a VLAN in interface view.
When you assign a trunk port to a VLAN, follow these restrictions and guidelines:
•
To change the link type of a port from trunk to hybrid or vice versa, set the link type to access
first.
•
To enable a trunk port to transmit packets from its PVID, you must assign the trunk port to the
PVID by using the port trunk permit vlan command.
To assign a trunk port to one or multiple VLANs:
Step
Enter system view.
1.
Enter interface view.
2.
Configure the link type of the
3.
port as trunk.
Assign the trunk port to the
4.
specified VLANs.
Command
•
Enter Layer 2 Ethernet
interface view or Layer 2
aggregate interface view:
interface interface-type
interface-number
•
Enter S-channel interface
view:
interface s-channel
interface-number.channel-
id
•
Enter S-channel
aggregate interface view:
interface
schannel-aggregation
interface-number:channel-
id
port link-type access
port access vlan vlan-id
Command
system-view
•
Enter Layer 2 Ethernet
interface view, RPR logical
interface view, or Layer 2
aggregate interface view:
interface interface-type
interface-number
•
Enter S-channel interface
view:
interface s-channel
interface-number.channel-id
•
Enter S-channel aggregate
interface view:
interface
schannel-aggregation
interface-number:channel-id
port link-type trunk
port trunk permit vlan
{ vlan-id-list | all }
119
Remarks
N/A
By default, all ports are access
ports.
By default, all access ports belong
to VLAN 1.
Remarks
N/A
N/A
By default, all ports are access
ports.
By default, a trunk port permits
only VLAN 1.