H3C S7500E-X Configuration Manual page 240

Step
Configure the
3.
advertisable TLVs (in
Layer 2 Ethernet
interface view).
Configure the
4.
advertisable TLVs (in
Layer 3 Ethernet
interface view or
management Ethernet
interface view).
Command
•
lldp tlv-enable { basic-tlv { all |
port-description | system-capability |
system-description | system-name |
management-address-tlv
[ ip-address ] } | dot1-tlv { all |
port-vlan-id | link-aggregation | dcbx |
protocol-vlan-id [ vlan-id ] | vlan-name
[ vlan-id ] | management-vid
[ mvlan-id ] } | dot3-tlv { all | mac-physic
| max-frame-size | power } | med-tlv
{ all | capability | inventory |
network-policy [ vlan-id ] |
power-over-ethernet | location-id
{ civic-address device-type
country-code { ca-type
ca-value }&<1-10> | elin-address
tel-number } } }
•
lldp agent nearest-nontpmr tlv-enable
{ basic-tlv { all | port-description |
system-capability |
system-description | system-name |
management-address-tlv
[ ip-address ] } | dot1-tlv { all | evb |
port-vlan-id | link-aggregation } }
•
lldp agent nearest-customer
tlv-enable { basic-tlv { all |
port-description | system-capability |
system-description | system-name |
management-address-tlv
[ ip-address ] } | dot1-tlv { all |
port-vlan-id | link-aggregation } }
•
lldp tlv-enable { basic-tlv { all |
port-description | system-capability |
system-description | system-name |
management-address-tlv
[ ip-address ] } | dot1-tlv { all |
link-aggregation } | dot3-tlv { all |
mac-physic | max-frame-size | power }
| med-tlv { all | capability | inventory |
power-over-ethernet | location-id
{ civic-address device-type
country-code { ca-type
ca-value }&<1-10> | elin-address
tel-number } } }
•
lldp agent { nearest-nontpmr |
nearest-customer } tlv-enable
{ basic-tlv { all | port-description |
system-capability |
system-description | system-name |
management-address-tlv
[ ip-address ] } | dot1-tlv { all |
link-aggregation } }
227
Remarks
By default:
•
Nearest bridge
agents can
advertise all types of
LLDP TLVs (only
port VLAN ID and
link aggregation
TLVs are supported
in 802.1
organizationally
specific TLVs)
except the location
identification TLV.
•
Nearest non-TPMR
bridge agents can
advertise only the
EVB TLV.
•
Nearest customer
bridge agents can
advertise basic
TLVs and IEEE
802.1
organizationally
specific TLVs (only
port VLAN ID and
link aggregation
TLVs are
supported).
By default:
•
Nearest bridge
agents can
advertise all types of
LLDP TLVs (only
link aggregation
TLV is supported in
802.1
organizationally
specific TLVs)
except network
policy and location
identification TLVs.
•
Nearest non-TPMR
bridge agents
advertise no TLVs.
•
Nearest customer
bridge agents can
advertise basic
TLVs and IEEE
802.1
organizationally
specific TLVs (only
link aggregation
TLV is supported).