Configuring A Port To Operate In Manual Voice Vlan Assignment Mode; Configuration Restrictions And Guidelines; Configuration Procedure - H3C S7500E-X Configuration Manual

Step
Enable the voice VLAN
8.
feature on the port.
Configuring a port to operate in manual voice
VLAN assignment mode

Configuration restrictions and guidelines

When you configure a port to operate in manual voice VLAN assignment mode, follow these
restrictions and guidelines:
•
You can configure different voice VLANs for different ports on the same device. Make sure the
following requirements are met:
One port can be configured with only one voice VLAN.
Voice VLANs must be existing static VLANs.
•
Do not enable voice VLAN on the member ports of a link aggregation group. For more
information about link aggregation, see
•
To make a voice VLAN take effect on a port operating in manual mode, you must manually
assign the port to the voice VLAN.
•
EVB is not supported on a port that is enabled with the voice VLAN feature. For more
information about EVB, see EVB Configuration Guide.

Configuration procedure

To configure a port to operate in manual voice VLAN assignment mode:
Step
Enter system view.
1.
(Optional.) Enable the voice
2.
VLAN security mode.
(Optional.) Add an OUI
3.
address for voice packet
identification.
Enter Layer 2 Ethernet
4.
interface view.
Configure the port to operate
5.
in manual voice VLAN
assignment mode.
Command
voice-vlan vlan-id enable
"Configuring Ethernet link
Command
system-view
voice-vlan security enable
voice-vlan mac-address oui
mask oui-mask [ description
text ]
interface interface-type
interface-number
undo voice-vlan mode auto
165
Remarks
By default, the voice VLAN
feature is disabled.
Before you configure a voice
VLAN, you must create a VLAN.
aggregation."
Remarks
N/A
By default, the voice VLAN
security mode is enabled.
By default, system default OUI
addresses exist. For more
information, see Table 10.
N/A
By default, a port operates in
automatic voice VLAN
assignment mode.