H3C S7500E-X Configuration Manual page 157

Step
Return to system view.
4.
Create one or multiple
5.
secondary VLANs.
Return to system view.
6.
Enter VLAN view of the
7.
primary VLAN.
Associate the primary
8.
VLAN with the secondary
VLANs.
Return to system view.
9.
10. Enter interface view of the
uplink port.
11. Configure the uplink port
as a promiscuous or trunk
promiscuous port of the
specified VLANs.
12. Return to system view.
13. Enter interface view of the
downlink port.
14. Assign the downlink port to
secondary VLANs.
Command
quit
vlan { vlan-id1 [ to vlan-id2 ] |
all }
quit
vlan vlan-id
private-vlan secondary
vlan-id-list
quit
interface interface-type
interface-number
•
Configure the uplink port
as a promiscuous port of
the specified VLAN:
port private-vlan vlan-id
promiscuous
•
Configure the uplink port
as a trunk promiscuous
port of the specified
VLANs:
port private-vlan
vlan-id-list trunk
promiscuous
quit
interface interface-type
interface-number
a. Set the link type of the
port:
port link-type
{ access | hybrid |
trunk }
b. Assign the access port
to the specified VLAN:
port access vlan
vlan-id
c. Assign the trunk port to
the specified VLANs:
port trunk permit vlan
{ vlan-id-list | all }
d. Assign the hybrid port
to the specified VLANs:
port hybrid vlan
vlan-id-list { tagged |
untagged }
144
Remarks
N/A
N/A
N/A
N/A
By default, a primary VLAN is not
associated with any secondary
VLANs.
N/A
N/A
By default, a port is not a promiscuous
or trunk promiscuous port of any
VLANs.
N/A
N/A
Select substep b, c, or d depending on
the port link type.