Assigning An Access Port To A Vlan - H3C S7500E-X Configuration Manual

How ports of different link types handle frames
Actions
In the
inbound
direction for
an untagged
frame
In the
inbound
direction for
a tagged
frame
In the
outbound
direction
In a VLAN-aware network, the default processing order for untagged packets is as follows, in
descending order of priority:
•
MAC-based VLANs.
•
IP subnet-based VLANs.
•
Protocol-based VLANs.
•
Port-based VLANs.

Assigning an access port to a VLAN

You can assign an access port to a VLAN in VLAN view or interface view.
Make sure the VLAN has been created.
Assign one or multiple access ports to a VLAN in VLAN view
Step
Enter system view.
1.
Enter VLAN view.
2.
Assign one or multiple
3.
access ports to the VLAN.
Assign an access port to a VLAN in interface view
Step
Enter system view.
1.
Access
Tags the frame with the
PVID tag.
•
Receives the
frame if its VLAN
ID is the same as
the PVID.
•
Drops the frame if
its VLAN ID is
different from the
PVID.
Removes the VLAN tag
and sends the frame.
Command
system-view
vlan vlan-id
port interface-list
Command
system-view
Trunk
•
If the PVID is permitted on the port, tags the frame with the
PVID tag.
•
If not, drops the frame.
•
Receives the frame if its VLAN is permitted on the port.
•
Drops the frame if its VLAN is not permitted on the port.
•
Removes the tag and
sends the frame if the
frame carries the PVID
tag and the port belongs
to the PVID.
•
Sends the frame without
removing the tag if its
VLAN is carried on the
port but is different from
the PVID.
118
Hybrid
Sends the frame if its VLAN is
permitted on the port. The
tagging status of the frame
depends on the port hybrid
vlan command configuration.
Remarks
N/A
N/A
By default, all ports belong to
VLAN 1.
Remarks
N/A