Configuring The Management Address And Its Encoding Format - H3C S7500E-X Configuration Manual

Step
Configure the
5.
advertisable TLVs (in
Layer 2 aggregate
interface view).
Configure the
6.
advertisable TLVs (in
Layer 3 aggregate
interface view).
Configuring the management address and its encoding
format
LLDP encodes management addresses in numeric or string format in management address TLVs.
If a neighbor encodes its management address in string format, set the encoding format of the
management address to string on the connecting port. This guarantees normal communication with
the neighbor.
To configure a management address to be advertised and its encoding format on a port:
Step
Enter system view.
1.
Enter Layer 2/Layer 3
2.
Ethernet interface view,
management Ethernet
interface view, or Layer
2/Layer 3 aggregate
interface view.
Command
•
lldp agent nearest-nontpmr tlv-enable
{ basic-tlv { all |
management-address-tlv [ ip-address ]
| port-description | system-capability |
system-description | system-name } |
dot1-tlv { all | evb | port-vlan-id } }
•
lldp agent nearest-customer
tlv-enable { basic-tlv { all |
management-address-tlv [ ip-address ]
| port-description | system-capability |
system-description | system-name } |
dot1-tlv { all | port-vlan-id } }
•
lldp tlv-enable dot1-tlv
{ protocol-vlan-id [ vlan-id ] |
vlan-name [ vlan-id ] | management-vid
[ mvlan-id ] }
lldp agent { nearest-nontpmr |
nearest-customer } tlv-enable basic-tlv { all
| management-address-tlv [ ip-address ] |
port-description | system-capability |
system-description | system-name }
Command
system-view
interface interface-type
interface-number
228
Remarks
By default:
•
Nearest non-TPMR
bridge agents can
advertise only EVB
TLVs.
•
Nearest customer
bridge agents can
advertise basic
TLVs and IEEE
802.1
organizationally
specific TLVs (only
port and protocol
VLAN ID TLV is
supported).
Nearest bridge agents
are not supported on
Layer 2 aggregate
interfaces.
By default:
•
Nearest non-TPMR
bridge agents
advertise no TLVs.
•
Nearest customer
bridge agents can
advertise only basic
TLVs.
Nearest bridge agents
are not supported on
Layer 3 aggregate
interfaces.
Remarks
N/A
N/A