H3C S7500E-X Configuration Manual page 66

[Device-Route-Aggregation1] lacp edge-port
[Device-Route-Aggregation1] quit
# Assign Layer 3 Ethernet interfaces GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 to
aggregation group 1.
[Device] interface gigabitethernet 1/0/1
[Device-GigabitEthernet1/0/1] port link-aggregation group 1
[Device-GigabitEthernet1/0/1] quit
[Device] interface gigabitethernet 1/0/2
[Device-GigabitEthernet1/0/2] port link-aggregation group 1
[Device-GigabitEthernet1/0/2] quit
Configure the server as required. (Details not shown.)
2.
Verifying the configuration
# Display detailed information about all aggregation groups on the device during the server reboot
process.
[Device] display link-aggregation verbose
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected, I -- Individual
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregate Interface: Route-Aggregation1
Aggregation Mode: Dynamic
Loadsharing Type: Shar
System ID: 0x8000, 000f-e267-6c6a
Local:
Port
--------------------------------------------------------------------------------
GE1/0/1
GE1/0/2
Remote:
Actor
--------------------------------------------------------------------------------
GE1/0/1
GE1/0/2
The output shows that GigabitEthernet 1/0/1 and GigabitEthernet 1/0/2 are in Individual state when
they have not received LACPDUs from the server. Both GigabitEthernet 1/0/1 and GigabitEthernet
1/0/2 can forward packets, which ensures zero packet loss.
Status Priority Oper-Key
I 32768 1
I 32768 1
Partner Priority Oper-Key
0 32768 0
0 32768 0
Flag
{AG}
{AG}
SystemID
0x8000, 0000-0000-0000 {DEF}
0x8000, 0000-0000-0000 {DEF}
53
Flag