Configuring A Vlan Group - H3C S7500E-X Configuration Manual

•
Assign the port to the protocol-based VLANs.
•
Associate the port with the protocol templates of the protocol-based VLANs.
When an untagged packet arrives at the port, the port processes the packet as follows:
•
If the protocol type and encapsulation format in the packet match a protocol template, the port
tags the packet with the VLAN tag specific to the protocol template.
•
If no protocol templates are matched, the port tags the packet with its PVID.
The voice VLAN in automatic mode processes only tagged voice traffic. Do not configure a VLAN as
both a protocol-based VLAN and a voice VLAN.
To configure a protocol-based VLAN:
Step
Enter system view.
1.
Enter VLAN view.
2.
Create a protocol
3.
template for the VLAN.
Exit VLAN view.
4.
Enter interface view.
5.
Configure the port link
6.
type as hybrid.
Assign the hybrid port to
7.
the specified
protocol-based VLANs.
Associate the hybrid port
8.
with the specified
protocol-based VLAN.

Configuring a VLAN group

A VLAN group includes a set of VLANs.
On an authentication server, a VLAN group name represents a group of authorization VLANs. When
an 802.1X user passes authentication, the authentication server assigns a VLAN group name to the
device. The device then uses the received VLAN group name to match the locally configured VLAN
group names. If a match is found, the device selects a VLAN from the group and assigns the VLAN to
the user. For more information about 802.1X authentication, see Security Configuration Guide.
To configure a VLAN group:
Command
system-view
vlan vlan-id
protocol-vlan
[ protocol-index ] { at | ipv4 |
ipv6 | ipx { ethernetii | llc |
raw | snap } | mode
{ ethernetii etype etype-id |
llc { dsap dsap-id [ ssap
ssap-id ] | ssap ssap-id } |
snap etype etype-id } }
quit
•
Enter Layer 2 Ethernet
interface view:
interface interface-type
interface-number
•
Enter Layer 2 aggregate
interface view:
interface
bridge-aggregation
interface-number
port link-type hybrid
port hybrid vlan vlan-id-list
{ tagged | untagged }
port hybrid protocol-vlan
vlan vlan-id { protocol-index
[ to protocol-end ] | all }
127
Remarks
N/A
N/A
By default, no protocol template is
configured for a VLAN.
N/A
N/A
By default, all ports are access ports.
By default, a hybrid port is an untagged
member of the VLAN to which the port
belongs when its link type is access.
By default, a port is not associated with
any protocol-based VLANs.