Holder Assembly - Oki B 4100 Maintenance Manual

4.1.3.11 Holder Assembly

(1) Disassembly procedure
a) First, carry out procedure up to the point
of the 4.1.3.2 (ID Unit, Cover-Rear, Cover-
NCU and Cover-MAIN).
b) Dismount the Bracket-Package.
c) Dismount the Holder-Paper.
d) Unlock and dismount the Guide-Paper
(L) and Guide Paper (R).
e) Remove the claw and dismount Spring-
Holder.
f) Remove the claw and dismount Spring-
Stopper.
Bracket-Package
(2) Reassembly procedure
Reverse the disassembly procedures.
40055101TH Rev.4
Guide-Paper (R)
Guide-Paper (L)
Holder-Paper
Spring-Holder
Spring-Stopper
(CP4.1 Fig. 26)
172 /