Oki B 4100 Maintenance Manual page 111

P.F.
Item
No.
14 2'nd cassette paper size (option)
15 User language
16 Incoming ring
Rev.2
17 Remote receive
18 Memory and feeder switch
19 Power save mode
Rev.3
20 ECM function
40055101TH Rev.4
Table 2.9.4 (3/4) User's Initial Settings (Function Program)
Selects A4, LETTER or LEGAL 13˜, LEGAL 14˜/
OTHER (when installing Bi-Centro board) by this
function.
The operator must select the preferable paper size as
the machine cannot detect the paper size automatically.
(for OKIFAX 5000 series)
A choice of 2 languages for LCD and print message are
available.
Language 1 and Language 2
Instead of ringer circuit, software can control built-in
speaker to ring sound.
To enable (ON) or disable (OFF) or distinctive ring
(DRC) a software generated ring sound to indicate
arrival of an incoming bell.
This function is used to transfer the call received by
external telephone (connected to fax) by entering pre-
set two-digits.
The following combinations are selectable.
00/11/22/33/44/55/66/77/88/99/**/##/OFF selectable.
Switches the transmission mode between the memory
and feeder.
MEM. TX/FEEDER TX selectable.
Note: Memory or feeder setting can register as the
When the fax becomes the operation state, power
supply is feeding to the all circuits. By adoption of this
system, power consumption at standby state becomes
below 0.5 W
Note: Power save mode is not available
Pre-heating time (Standby to print):
Approx 30 sec for OKIOFFICE44/OKIFAX 4100
Approx 20 sec for OKIFAX 5000 series
Eanbles or disables power save mode
ON:
OFF: Disables
Enables or disables ECM (error corection mode) com-
munication.
ON:
OFF: Disables
Specifications
defult by operating the "F + OT 2".
forOKIOFFICE44/OKIFAX5300/5600.
Enables
Enables
Default
111 /