Oki B 4100 Maintenance Manual page 82

T.F.
Item
No.
10 MDY/DMY
11 Long document SCAN
12 Tone for Echo
13 MH only
14 High-speed modem rate
Rev.2
15 T1 (TX), timeout value
40055101TH Rev.4
Table 2.9.1 (3/6) Service Personnel Initial Settings
Switches LCD display and report print from month/
day/year to day/month/year or vice versa.
MDY/DMY selectable.
Switches the function of transmitting long-size docu-
ment (more than 380 mm).
ON :
OFF :
Switches the function to apply to poor lines with echo
in overseas transmission, etc.
ON:
OFF:
Echo Protection
Ignore 1st DIS
CED-DIS timer
Tone for echo
Switches the function of limiting image compression
only to the MH codes.
ON :
OFF :
Specifies the modem's starting speed, 33.6K, 28.8K,
14.4k, 9.6k, or 4.8kbps.
Note:
Registers the time duration (in seconds) for which the
fax waits for the remote station's answer.
This timer starts when the last dialled digit has been
sent in the automatic transmission mode.
* Selects the 3 digit timer
010 to 255 sec selectable.(in one second steps)
Specifications
Unlimited
380 mm.
Enables
Disables
OFF
OFF
75 ms 1.5 sec
OFF
(TF-12 table)
Coding scheme is MH only. When the
receiving image data is affected by noise on
the telephone line.
Any of MH, MR and MMR.
The following protocol is added to OKIFAX
5500/5600:
ITU-T standard V.34 for 33.6K or 28.8
kbps operation.
Default
ON
ON
ON
82 /